The stations.list file gives details of every station in Australia. Note
that a station is the original transmitter of a video stream. It can be in a
different location that the receiver, and it can be received on a number of
different channels. In other words, stations and channels are not the same.
For example, Showtime is broadcast from Sydney via satellite and is received
in other locations. This is why there are no channel numbers in the
stations.list file.

Each state is represented by a directory: ACT, NSW, VIC, QLD, SA, WA, TAS, NT.
In each state directory there is a DBS.head file, which names the Digital FTA,
Cable and Satellite lineups for the whole state. This assumes that the Digital
logical channel numbers (LCNs) are the same state-wide.

In each state directory there is a single *.head file which holds _every_
lineup for that state: Antenna, Digital, Cable and Satellite lineups.
This allows the following:

	You Want This			You Choose This in Guided Setup
	---------------------------------------------------------------
	Any single signal source	Cable
	Two signal sources		Satellite and Cable, but
					the tuner must be Cable

Each state has several lineup files with this naming convention:

	Digital_FTA.lnup		Digital FTA for whole state
	"Provider"_Digital_Sat.lnup	Satellite lineup for whole state
	"Provider"_Sat.lnup	Satellite lineup for whole state
	"Provider"_Digital_Cable.lnup	Cable lineup for whole state
	"Provider"_Analog_Cable.lnup	Cable lineup for whole state
	"Area"_Analog_FTA.lnup		Analog FTA for a specific region

Each lineup file lists the channels available in the lineup, i.e the channel
number and the associated station. Note that most of the Cable and Satellite
lineups "use" a second file in the CableSat/ directory to get most of the
channels, and then list only the "special" channels for that state.